Eskimo 15 CRX 3G 3-Piece Take-A-Part
– With Outrigger & Spinnaker Sail
Expedition-Grade Kevlar/Graphite Construction
Picture shows the Eskimo 15 CRX 3G Take-A-Part outfitted with an
8-foot Take-A-Part Outrigger and a Spinnaker Sail Rig.
The Outrigger halves (and Take-A-Part Poles)
fit inside the center section of the boat.
and outfitting of the Eskimo 15 Take-A-Part are identical to those
of the one-piece version.
Take-A-Part provides the same unrestricted leg room as the longer
ESKIMO 15 CRX 3G 3-Piece T-A-P, Kevlar/Graphite
Travel/Storage Bags for Take-A-Part Kayaks, set of 3
Outrigger 8 ft. HHV, Take-A-Part Version ($1200)
Outrigger Parts, 7 ft. Double-Pole System, incl. Prep.#2045 ($700)
Take-A-Part Feature for Outrigger Pole, each ($100)
Trampoline, for 58" Pole Spacing ($275)
Spinnaker Sail Rig Option:
Downwind Spinnaker Sail Rig/Kayaks, 8 sq. ft., incl. Prep. #1900 ($500)
Bent-Shaft Canoe Paddle, lightweight graphite ($185)
Camano - 6" X 19" slender blade, fiberglass, 2-pc. ($265)
Super Spray Skirt, expedition-grade ($150)
Super Rain/Dust Cover ($45.)
Retroglide Deluxe Life Vest ($125)
Deluxe Backrest with Pocket ($60)
Deluxe Foam Seat "The Spoiler" ($60)
expedition-proven workhorse offers cargo space to pack provisions
for extended trips.
Large bow and stern hatches facilitate easy packing. Stuff the pieces
with food and equipment and they become one's luggage for accessing
any corner of the world. Put them on a commercial jet, commuter
plane, a bush plane or helicopter, aboard a sailboat or motor yacht,
a train, bus, donkey... if you can get there, the Eskimo 15 will
make it, too!
This compact Take-A-Part can be easily stored in tight places!
Length 15’ Width
24.25" Load Capacity 300 lbs.
Weight Kevlar/Graphite 50 lbs.
> Model incorporates our innovative & exclusive CR-System